Marq Lighting Gesture Wash 102 - Frequently Asked Questions

1 1 1 1 1 Rating 5.00 (1 Vote)

Marqlighting Gestrewash102 main1The Marq Lighting Gesture Wash 102 is the latest model in moving heads line, featuring 32 watts per side moving head. This 2-sided moving head has independent RGBW capabilities on each side, with a wide angle to provide a smooth wash effect. The guide answers some frequently asked questions about the Marq Lighting Gesture Wash 102.

 

Frequently Asked Questions

 

What comes with the Gesture Wash 102?

Inside the Gesture Wash 102 box you will find the following:

  1. Gesture Wash 102
  2. IEC cable (power cable)
  3. 1/4 turn hanging bracket
  4. User Guide
  5. Safety & Warranty Manual

 

Does the Gesture Wash 102 have DMX capability?

Yes, it does!  The Gesture Wash 102 has the traditional DMX IN and DMX OUT jacks built in.  This will allow you to use these lights with a qualified DMX controller, and with the proper DMX Cables.

 

Does this have a Slave Mode?

The GestureWash 102 does have a Slave mode

This is very easy to do, learn how by following the steps suggested below:

  1. Press the Menu button to access the internal options.
  2. Use the Down button to highlight the Auto Movement selection, and push Enter.
  3. Use the Down button to highlight SLAv, and push Enter.
  4. You can now use the Up or Down buttons to select 1-4 this option, and press Enter to choose your selection.

 

How do I setup the Sound-Active mode?

For setting the Sound-Active mode, follow the steps below.

  1. Press the Menu button to access the internal options.
  2. Use the Down button to highlight the Auto Movement selection, and push Enter.
  3. Use the Down button to highlight Soun, and push Enter.
  4. You can now use the Up or Down buttons to turn this option On or Off, and press Enter to choose your selection.

 

How do I setup the Sound-Active Sensitivity?

For setting the Sound-Active mode sensitivity, follow the steps below.

  1. Press the Menu button to access the internal options.
  2. Use the Down button to highlight the Auto Movement selection, and push Enter.
  3. Use the Down button to highlight SEnS, and push Enter.
  4. You can now use the Up or Down buttons to turn this option On or Off, and press Enter to choose your selection.

 

How do I setup the Gesture Wash 102 with a DMX controller?

If you are going to use the Marq Lighting Gesture Wash 102 with a DMX controller, follow the steps suggested below:

  1. Connect a DMX cable from the DMXoutput on the DMX controller that you are using, and attach it to the DMX input on the Gesture Spot 300.  Below is a picture showing this.

    Gesturewash102 dmx

  2. Each fixture in this chain will receive all DMX data. Depending on how many lights are inside your universe will depend on how many lights may be used.

What is a Universe?

DMX-512 (Digital MultipleX-512 channels), as the name implies, can put control for up to 512 functions (the brightness of a dimmer, the mirror pan or tilt of a scanner, etc.) on one circuit (the daisy-chain from device-to-device). All of the devices on the same circuit out of a controller are referred to as a "universe." Many of the bigger, usually PC-based, controllers have outputs for more than one universe to allow control of more than 512 functions. Because DMX-512 is designed to have only one controller, a second controller would require a second universe, even if you need fewer than 512 channels total.

 

What is the Power Link Feature?

The Powerlink feature lets you link multiple Marq Lighting Gesture Wash 102 moving heads together with power cables (IEC cables).  One reason to do this may be if you have a shortage of wall outlets or power supplies to plug multiple units into. You can then power all of them when having just one Marq Lighting GestureWash 102 connected to a wall outlet. 

  1. Insert the included power cable into the wall and then the other end into the Marq Lighting Gesture Wash 102

  2. On the opposite power plug on the Marq Lighting Gesture Wash 102, you will see a power jack that works the opposite way.  On this jack plug the opposite end of an IEC cable here.

    Gesturewash102 PWR.1

  3. Now plug the other end of the power cable into the power jack of another Marq Lighting GestureWash 102.  This will supply power to the Marq Lighting GestureWash 102.

 

Does the gesture Wash 102 have a limit for Pan & Tilt?

No, the Gesture Wash 102 has continuous Pan & Tilt for endless rotation on both axes

 

What is the beam angle?

The Marq Lighting Gesture Wash 102 has a 38.5-degree beam angle on both sides of the fixture.


Where can I find more information about DMX and lighting software?

 

 

Further Technical Support

Whether you are a customer or dealer, if you already own a Marq product, or if you just have pre-sales questions, the Marq technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.  

 

 

Popular

Latest Articles