The Numark NS7III is like no other DJ controller on the market. It is a premier four-deck controller which features three high-resolution color screens with a stackable waveform display and an interactive control surface. In this article, we touch on hardware & software setup, controller overview and exciting features to the NS7III.
- NS7III Platter Assembly
- NS7III Display Assembly
- Drivers and Software Download & Installation
- NS7III Features Overview & Operation
- Additional Resources
- Further Technical Difficulties
Follow the directions below to correctly set up the platters:
- Remove the NS7III from the packaging. Remove the two platter assemblies from the package (underneath the NS7III controller). Place the NS7III on a flat, stable surface for operation. Ensure unit has adequate air flow to all ventilation ports (especially if installed in a case).
- Place the platter onto the NS7III by aligning the pins in the bottom of the platter with the holes in the NS7III's motor.
- Place the slipmat onto the platter, then place the vinyl over the slipmat.
- Line up the notch in the spindle with the screw in the vinyl's 45 RPM Adapter. Use the Allen wrench (included) to tighten the screw, locking the adapter to the spindle. Do not over tighten as this could strip out the hex head.
Follow the directions below to correctly set up your screens:
- Attach your NS7III Display screens to your controller.
- Connect the specialized power cord that's included with your screens to the DC OUT and DC IN port on your NS7III Display screen.
- Connect the USB B male connector of your USB cable to the USB port located on your NS7III.
- Connect the USB A male connector of your USB cable to the NS7 USB port located on your NS7III Display.
- With another USB cable, connect the USB B male connector to the TO PC USB port located on your NS7III Display.
- Connect the USB A male connector of your USB cable to your computers USB port.
- Now power on both your NS7III and the NS7III Display screen.
Without the drivers and software installed, you will not be able to fully enjoy your NS7III. Please follow the below instructions to install the necessary drivers and software for your NS7III.
For Mac OS computers, the NS7III is class compliant! There are no additional drivers to install. For Windows users, you will need to download the Windows Audio Driver v1.0.0 and Windows Display Driver v1.0.0 drivers and install both drivers.
Windows Users Only
- Unzip the Driver files and extract them to your desktop.
- Run the Driver installation file.
- Follow the onscreen instructions to complete the driver installation.
Note: Plug in and power on the NS7III only when prompted
- Download the Serato DJ Software: http://serato.com/dj/downloads
- Unzip the Serato Software package and extract them to your desktop.
- Run the Serato DJ Setup file.
- Follow the onscreen instructions to complete the software installation.
Note: Serato DJ 1.8 or higher is required for NS7III compatibility
In this video below we walk you through the key features of the NS7III and great tips on how to use the capacitive touch-sensitive knobs and effects.
The knobs on the NS7III are touch sensitive or capacitive touch knobs. This means that just by touching them you can turn on effects, kill EQ frequencies, as well as perform multiple tasks with a single touch. The touch modes are explained further in detail below.
Touch & Touch Lock:
Filter Roll & Filter FX:
Watch this quick overview to familiarize yourself with NS7III Pads
The pads have different functions on each Deck depending on the current Pad Mode. These pads are the same pads used with Akai Professional MPCs, so they are velocity-sensitive (in certain modes only), durable, and easy to play. In this section, when referring to specific pads, it will refer to the numbers as shown in the diagram below the mode. Use the Parameter buttons to increase or decrease values for various functions in each Pad Mode.
Hot Cue Mode (Red): Each pad assigns a Hot Cue Point or returns the track to that Hot Cue Point. (Pads 1-5 are essentially duplicates of Hot Cue Buttons 1-5). When a Hot Cue Button is unlit, you can assign a Hot Cue Point by pressing it at the desired point in your track. Once it is assigned, the Hot Cue Button will light. Press and hold Shift and then press a pad to delete its assigned Hot Cue Point.
Hot Cue Auto-Loop Mode (Orange): Each pad assigns a Hot Cue Point or returns the track to that Hot Cue Point, but in both cases, it also creates an Auto-Loop at that point. The Auto-Loops length is set in the software, which can be decreased or increased with the Parameter < or Parameter > button.
Auto-Loop Mode (Dark Blue): Each pad triggers or releases an Auto-Loop of a different length. Press and hold Shift and then press the Parameter < or Parameter > button to shift the Auto-Loop backward or forward.
Shift + Parameter < and Parameter > to move the loop back and forward on the timeline.
Loop Roll Mode (Greenish Blue): Each pad triggers a momentary Loop Roll. Press the Parameter < or Parameter > button to change the Loop Roll's time division.
Shift + Parameter < and Parameter > to move the loop back and forward on the timeline.
Loop: This Pad Mode button switches the pads between two banks in Manual Loop Mode. When the button is unlit, the first press will always select the first bank. Manual Loop Mode: Pads 1-4 (the top row) return the track to one of your saved Manual Loops. You set and assign a Manual Loop using Pads 5-8 (the bottom row). The pad layouts for the two banks are identical.
Manual Loop: Press any one of Pads 1-4 (the top row) that does not have a Manual Loop assigned to it. Press Pad 5 to set the Loop In Point, and then press Pad 6 to set the Loop Out Point and trigger the loop.
Trigger an assigned Manual Loop: Press any one of Pads 1-4 (the top row) that has a Manual Loop assigned to it. You can use Pad 7 to activate or deactivate the loop. Press Pad 8 to return the track to the last triggered Manual Loop and activate it ("reloop").
Delete a Manual Loop: Press and hold Shift and then press the corresponding pad (of Pads 1-4). Press the Parameter < or Parameter > button to halve or double the Manual Loop's length. Press and hold Shift and then press the Parameter < or Parameter > button to shift the Manual Loop backward or forward.
Sample Player Mode (Pink): Pads 1-8 each trigger a sample, which you can assign in the software (the volume level is also set in the software). Unlit pads have no sample assigned to them. Violet pads have a sample assigned but are not triggered. Magenta pads have a sample assigned and are currently playing.
Sample Velocity Trigger Mode (Purple): The pads behave identically to the pads in Sample Player Mode, except they are velocity-sensitive, so triggered samples will play back at a volume level proportional to how heavily you pressed the pads. This mode can give your performance more of a "human feel."
Slicer Mode (Red): The eight pads represent eight sequential "Slice" Domains. While holding Shift press the Parameter < or Parameter > button to decrease or increase the Slice Domain size. The Slices are represented by the light moving through the pads as it progresses through each eight-Slice phrase. Press a pad to play that Slice—hold it down if you want to keep looping it. Press the Parameter < or Parameter > button to decrease or increase the Slice’s repeat time division. When you release the pad, the track will resume normal playback from where it would have been if you had never pressed it (i.e., as if the track had been playing forward the whole time.)
Slicer Loop Mode (Blue): The pads behave identically to the pads in Slicer Mode, except the eight-Slice phrase will loop rather than moving forward continuously through the track.
Press the Parameter < or Parameter > button to decrease or increase the Slice quantization. Press and hold Shift and then press the Parameter < or Parameter > button to decrease or increase the Slice Domain size.
Important: Your track must have a set Beat Grid for Slicer Mode or Slicer Loop Mode to work
NS7III’s full-color displays provide real-time feedback of the software. The left and right displays can show Performance View 1 or Performance View 2. The center display can show Library View or Waveform View.
Performance View 1: This view provides an alternative display of information about the current track, effects, hot cues, and loops.
Performance View 2: This view contains information about the current track, effects, hot cues, and loops.
Library View: This view lets you browse through your library, including crates and subcrates, and load a track to either deck.
Waveform View: This view contains the currently playing segments of the waveforms on the active decks. To switch which waveform is shown, press the Layer button for each deck. The waveforms will scroll by as the audio playhead moves through the track.
The waveforms are color-coded according to the frequency of each area: red indicates low (bass) frequencies, green indicated mid-range frequencies, and blue indicates high (treble) frequencies.
In each waveform, hot cue points are represented by triangles at the top and bottom of the waveform, and loop regions are represented by shaded-blue sections.
- Numark NS7III - Product Page
- Numark NS7III - User Guide
- Numark NS7III - Frequently Asked Questions
- Numark NS7III - What Are The Differences Between The NS7II and NS7III?
- Numark NS7III - Troubleshooting Audio Issues In Serato DJ
- Optimizing Your Computer For DJ Performance
- Serato Numark NS7III Hardware Page
Whether you are a customer or dealer, if you already own a Numark product, or if you just have pre-sales questions, the Numark technical support team is available to help!
Visit the link below to connect with any of the following support options: online community support, phone support, email support.